Thermoplastic Extruders

Diamond America manufactures custom thermoplastic extruders that accommodate a wide range of thermoplastic material including PVC, ABS, Polypropylene and PET. These high-performance theromoextruders provide consistent output for the extrusion of profile, pipe, tubing, sheet, blown film and compounding.

Available in 24:1 and 30:1 length over diameter with screw sizes ranging from 3/4 inch to 4 inches, floor and tilt units, air and water cooled, vented and non-vented extruders. Temperatures reach up to 600 degrees fahrenheit to ensure quality extrusions based on your requirements, batch after batch. 

With features such as a double reduction gear reducer, multiple heat zones and integrated controls and the most comprehensive customization options in the industry, Diamond America extruders are built with you in mind.

CONTACT US
to discuss your unique extrusion needs.

Thermoplastic Extruder Customization Options
TL075 Bench Top Extruder

TL075

The TL075 is a compact thermoplastic extruder ideal for benchtop setup. TL075 features a 3/4" diameter screw with 24:1 length over diameter.

TL150 thermoplastic extruder

TL150

TL150 Thermoplastic extruder features a 1-1/2" diameter screw, 24:1 length over diameter, 10,000 psi maximum barrel operating pressure with 3 heat zones and 1,600 watts per barrel zone.

Diamond America Thermoplastic Extruder

TL450

The Thermoplastic extruder model TL450 features a 4-1/2" diameter screw with 30:1 length over diameter. Other features include ductile iron casting feed throat, a four-bolt swing gate with die support arm, alignment hinge and 4000 watt heater, 10,000 psi maximum barrel operating pressure, 5 heat zones with 11,600 watts per barrel zone.

Specifications

Thermoextruders

DA Logo White SCREW
DIAMETER
L/D HOPPER
SIZE (ft3)
MAX BARREL
OPERATING PRESSURE
NUMBER OF
HEAT ZONES
WATTS /
BARREL ZONE
ELECTRICAL /
OPERATION
TL100
0.75"
24 to 1
?
?
?
?
?
TL150
1.5"
24 to 1
0.7
10,000 psi
3
1,600
480V / 60 HZ / 3PH
TL200
2"
24 to 1
3.6
10,000 psi
4
3,300
480V / 60 HZ / 3PH
TL250
2.5"
24 to 1
6.3
10,000 psi
4
6,000
480V / 60 HZ / 3PH
TL350
3.5"
24 to 1
9.7
10,000 psi
4
11,600
480V / 60 HZ / 3PH
TL450
4.5"
30 to 1
10.1
10,000 psi
5
11,600
480V / 60 HZ / 3PH

Diamond America THERMOEXTRUDER BENEFITS

US Made Logo
Question? CALL US.
96 East Miller Ave.
Akron, OH 44301
Scroll to Top