Table Top Extrusion Equipment
Diamond America’s range of table top extrusion equipment allows for easy setup and processing of materials in small batches. Table top extruders produce an even, consistent output for the extrusion of food, mastics, catalysts and consumer products.
Improve Production Time
Ideal for education and training, these compact and robust bench top extruders can also be used for testing to assist in research and development of material applications, processes and formulations, without loss of production time.
The Diamond America 1” Table Top Extruder (TT100 & SF100) can be customized to client specifications for testing processes to optimize conditions and achieve a superior end product.
Weighing in at only 85 lbs., the TT100 is portable and easy to move – ideal for use in a lab or university. With its built-in 115V AC Inverter, the compact table top extruder runs off a standard wall socket. On its mobile cart, the TT100 can be positioned wherever needed for use.
The SF100 single feed packer is available for those difficult to feed materials.
High processing variability means that a wide variety of extrusion processes can be emulated, adapting the TT100 to output continuous extrusions or pellets or to form sheets or profiles. Heating or cooling can be added to the hopper or barrel, if required.
Excellent process control means that the extruder’s parameters can be precisely adjusted and measured, allowing process accuracy and repeatability.
Benefits at a glance:
- Compact and transportable
- Ideal for testing and training
- Fast changeover time
- Easy to clean and maintain
- Perfect design for small batch processing
- Fully customizable
- Precise process control
The Production Environment Table Top
The TF200 2” Table Top Extruder boasts the same durable, ergonomic design and flexibility of the TT100, however, it has added capacity and a twin feed packer.
Smart, modular design allows rapid fitting and release of feeders, dies and cutters. The special Diamond America swing bolt configuration means that changeover between runs, or disassembly for cleaning or maintenance, takes only minutes.
Diamond America’s many years of industry knowledge and experience are evident in the design and performance of this reliable range of compact, efficient table top extruders.
|SIZE||L/D||GEARMOTOR||BARREL||ELECTRICAL / OPERATION||STANDARD OPTIONS|
|TT100||1||4 to 1||1HP||Grooved/Pin||110V/60HZ/1PH||Smooth Barrel, Continuous Screw, 8 to 1 L/D|
|SF100||1||4 to 1||1HP||Grooved/Pin||110V/60HZ/1PH||Smooth Barrel, Continuous Screw, 8 to 1 L/D|
|TF200||2||4 to 1||5HP||Grooved/Pin||230V/60HZ/3PH||Smooth Barrel, Continuous Screw, 8 to 1 L/D|